Combat Dye Migration

Here is a quick tip on how to combat dye migration, published in Printwear by Ed Branigan…

Test Fabric for Dye Migration

Ed Branigan gives a quick tip on how to test a fabric for bleeding or dye migration issues…

A Primer on Performancewear Ink Options

Here is an excerpt from an article on performance wear, written by Ed Branigan and recently published in Impressions Magazine.  To read the full article, click here:

Printing onto sportswear used to be a straightforward affair. Whether it was for a basketball or football team order, the fabric used was (for the most part) made of 100% polyester or a blend — usually with something stretchable such as Lycra spandex. The printing itself could be difficult — especially on athletic mesh material — but with patience and practice, great results were achievable. Polyester dye migration was the biggest issue printers usually encountered.

In recent years, we have seen the development of a broad range of new synthetic fabrics in the sports and athletic market. The terms “anti-wicking” and “dry fit” are entering the screen printing vernacular. The content of these different fabrics vary, but all have fallen under the umbrella term of “performancewear.” Polyester still is the dominant material element, but now the stretchable portion has risen from 5%-10% to 15%-20%.

There also are newer materials, such as Tactel nylon, or those with properties like the popular retail brand Under Armour — many of which are not only harder to screen print on, but also are heat-sensitive fabrics. Many fabric types and materials are being imported from all over the world and they all are different. Dye migration still is the largest problem to deal with, but some of the newer garments exhibiting heat sensitivity and extra stretch have become compounding problems.

DEFEATING DYE MIGRATION         By far, the most difficult — and often most baffling — problem affecting many screen printers is polyester dye migration. How many times have printers thought they did everything correctly, yet the white ink on a red polyester shirt still turned pink? The critical issue as far as dye migration goes is heat, and this is a very important point to remember.

Polyester dyes are synthetic, so they don’t absorb dyes like a natural fiber, such as cotton, would. They need help to do this. The polyester dye pigment molecules are sublimated at temperatures in the 260°F-270°F range, then chemically sealed onto the fiber.

Plastisol inks, on the other hand, need higher temperatures to cure — typically in the 300°F-320°F range. Put properly, the ink needs to become fused instead of cured. The two main components of plastisol are resin and plasticizer. When mixed, they stay wet for a long time. Once heat is applied, the resin begins to absorb the plasticizer. For textile plastisol inks, once the 300°F-320°F range is attained, the two elements become fully fused, or 100% solid.

When printing on polyester, the problem begins once the garment is exposed to temperatures beyond the 260°F-270°F range, which causes the dye to be set. At this stage of the ink-fusing process, there is the danger that the polyester dye will be sublimated again. If this happens, the plasticizer in the ink will try to “pull” the polyester dye molecules up into itself. This can happen either immediately, days or even weeks later. Once the dye molecules have become gaseous, the proverbial genie is out of the bottle.

There are two main ways to combat dye migration….Read more

International Coatings recently released a new product specifically designed for printing on difficult performance and athletic garments:  the 7100 Performance Pro Series.

International Coatings manufactures a complete line of phthalate-compliant screen printing inks, including a wide variety of whites, specialty inks, special effects inks, color matching systems, additives and reducers.  For more information on our products, please visit our website at www.iccink.com.

    International Coatings:     The Intelligent Choice

The Right White Ink

Ever wonder which white ink to use for what? John Levocz has a quick tip that was recently published in Impressions Magazine…

Top 5 Ink Products

Have you ever wondered which of International Coatings’ ink products are the most popular with printers? We often get asked that question, so here are our top 5 ink products:

How To Test For Dye Migration And/Or Ghosting

With today’s many choices of performance fabrics, printers are faced with the possibility that certain colored fabrics they need to print on may have a bleeding or dye migration and/or ghosting problem. Although we have previously covered the topic on how to deal with dye migration issues in terms of what inks to use, there are several tests a printer can do BEFORE printing to determine whether a fabric is more likely to have dye migration issues or not.

Underbases For Light And Dark Shirts

Lets talk about underbases. Every month we receive questions from our customers about whether they need to print an underbase and if so, which inks they should use. Here’s Kieth Stevens, our Western Regional Sales Manager with some insight into this topic…

Upcoming Seminar February 9th, 2011

International Coatings is hosting a new seminar alongside McLogan Supply Co., Inc. on February 9, 2011. At this seminar we will cover printing on polyester and athletic fabrics as well as some special effects techniques. Read more…

Use the Right Tool for the Job

At our seminars, we get a variety of printers. Some have printed for a long time, some just started or are thinking about starting. Some run successful large print shops with multiple automatics, some have a garage-based printing business. Often, we hear stories about how some try to shortcut processes or printing steps with home-made devices. Here is John Levocz, our North-East Regional Sales Manager with more on using the correct tools for the job…

The Need To Test

Why is testing so important? As we are seeing more and more diverse types of fabric and materials coming from all parts of the world, the need to do proper testing is becoming a MUST in screen printing. Here is our Northeast Regional Sales Manager, John Levocz with more insight on this topic…