New Hazard Communication Standard

September 8, 2015 at 4:00 am Leave a comment

Presentation1

If you haven’t heard of the 2012 Hazard Communication Standard (HCS 2012), it’s important that you take the time to familiarize yourself with it as soon as possible. It touches everyone, not just manufacturers.  HCS 2012 requires manufacturers and others to comply with strict new Safety Data Sheet (SDS) and label requirements.

HCS 2012 modifies our previous chemical hazard communications to conform with the United Nations’ (UN) Globally Harmonized System of Classification and Labeling of Chemicals (GHS).  It’s more detailed and encompassing in its hazard evaluation and labeling of chemicals, and is designed to harmonize our safety and labeling communication processes with international standards (making it easier for importers and exporters).

The three major changes to the Hazard Communication Standard that you should be aware of are:

  1. Hazard classification: The definitions of hazard have been changed to provide more specific criteria for hazard classification. These criteria will help ensure that hazard evaluations are consistent across manufacturers, and that labels and safety data sheets are more accurate as a result.
  2. Labels: Labels must now include new additional information – harmonized signal word, pictogram, and hazard statement for each hazard class and category. Precautionary statements must also be provided.
  3. Safety Data Sheets (SDS): Material Safety Data Sheets (MSDS) have been discontinued.  The new SDS follows a specified 16-section format.

In response to HCS 2012, International Coatings has converted its safety information and labeling:

  • Safety Data Sheets – With few exceptions, International Coatings has converted all of the safety information for its ink products to the new SDS format.  The new standard requires detailed SDS and no longer allows reporting for broader groupings of products (as the MSDS allowed).  You can access our SDS’ at our web site.
  • Labels and Containers – International Coatings is phasing out its litho-printed containers in favor of containers that contain product specific labels that contain the GHS information prescribed by HCS 2012.

What does HCS 2012 mean to you and what should you be doing now:

  • Take the time to understand the law.  You can find information on HCS 2012 and its requirements on OSHA’s web site  or at SGIA.
  • Update all of your safety information.  Be sure you have current and compliant SDS from all of your suppliers, and that you in turn are providing compliant information to your customers.
  • Familiarize yourself with the information on the new labels.  Not only do the labels contain much more information, some of that information is new and different from what was previously provided.  In particular, you will notice new hazard ‘pictograms’ and a new hazard classification system (very different from the HMIS system).
  • If you are a distributor, there are now certain new requirements and obligations with which you will need to comply.  For example, if you repackage, blend or mix inks, HCS 2012 considers you a manufacturer.

The Occupational Health and Safety Administration (OSHA), the agency administering and enforcing the law, recently agreed to provide relief to companies that are working to comply but are unable to do so. OSHA recognized that not all necessary data and information may yet be available (such as from upstream raw material suppliers) to allow manufacturers and distributors to classify their chemicals and provide GHS compliant labels.

Earlier this year, OSHA granted its enforcement division discretion in enforcing the compliance deadlines – June 1, 2015 for manufacturers and importers, and December 1, 2015 for distributors.  OSHA has indicated that it will provide relief only to those companies exercising reasonable and due diligence, and working in good faith to comply.

Steve Kahane is International Coatings’ president and CEO.   Prior to joining International Coatings, he held senior executive positions in the environment and engineering fields.

International Coatings manufactures a complete line of non-phthalate screen printing inks, including a wide variety of whites, specialty inks, special effects inks, color matching systems, additives and reducers. For more information on our products, please visit our website at www.iccink.com.

Advertisements

Entry filed under: General, Information, Newsletters. Tags: , , , , , , , , , , .

Throw Back Thursday – 1998 The Right Squeegee For The Printing Job At Hand

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Trackback this post  |  Subscribe to the comments via RSS Feed


Image of the Month

"Gellusion" Atom Print

"Gellusion" Atom Print

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 1,256 other followers

Recent Posts

Visit us on Facebook

Categories


%d bloggers like this: