Print a Stretchy Puff Design

April 5, 2016 at 5:40 am Leave a comment

WearablesWearables Magazine recently featured Kieth Stevens’ “recipe,” on how to print puff ink on Lycra or other stretchy fabrics without puckers or cracking.

1) CREATE YOUR RECIPE. Start with Super Stretch Clear 3805 (77%); you can find this at International Coatings). Add Puff Additive 220 (18%). Add the color of your choice, such as a color concentrate (5%).

2) ENSURE ALL YOUR INGREDIENTS ARE WELL MIXED. Poorly mixed ingredients will result in a poorly printed finished product, such as uneven loft or color striping.

3) PREPARE YOUR MESH AND EMULSION. Use a mesh screen that allows for the proper printing of your design. For a puff ink, a lower mesh screen, like an 86 mesh, is recommended in addition to a thick emulsion layer. Remember that the puff’s thickness can be determined by the thickness of ink you print. A thin emulsion coating will only deposit a small amount of ink, with little puff effect.

Snowflake1

4) PRINT, FLASH, PRINT. A thick ink layer is recommended to create a loftier puff print, so plan to print, flash and print several times.

5) CURE THE PRINT. Cure at 320°F for 60 seconds.

TIP: To add glitter and shine to the garment, create a second screen and print using a translucent, iridescent glitter flake ink, like the 155 Crystalina Shimmer (you can procure this from International Coatings).

See our accompanying Video on our IC TV YouTube Channel:

Avoid Puckering

When large design areas are covered with puff ink, the ink can expand to such a degree that the fabric underneath gets pulled or puckered due to the expansion process. To avoid fabric pucker, screen printers can modify their artwork. Instead of creating one solid design, create a design that uses dots or some other similar pattern. The spacing between the dots will allow for expansion of the puff ink while minimizing the pulling or puckering of the fabric. This technique is especially effective with fabrics that include Lycra or are stretchy.

Solid-vs-Dot-Pattern

Kieth Stevens has been a screen printer and industry representative for more than 35 years, and has been teaching screen printing for more than 12 years. In 2014, he won a prestigious Golden Image Award for screen printing from SGIA. Stevens is a regular contributor to International Coatings’ blogs.

International Coatings manufactures a complete line of non-phthalate screen printing inks, including a wide variety of whites, specialty inks, special effects inks, color matching systems, additives and reducers. For more information on our products, please visit our website at www.iccink.com.

Advertisements

Entry filed under: General, How-To. Tags: , , , , , , , , , , , , , , , , , , , , , , , .

Register Screens Successfully Get The Most Out Of Your Ink – Quick Tip

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Trackback this post  |  Subscribe to the comments via RSS Feed


Image of the Month

"Gellusion" Atom Print

"Gellusion" Atom Print

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 1,211 other followers

Recent Posts

Visit us on Facebook

Categories


%d bloggers like this: